Relax Island
designer Gibillero Design
code G531

PRODUCT DESCRIPTION
Isola Relax monobloc modular, available in different combinations.Made with dough, semi-fluid consistency of class S3, white cement of high resistance type 52,5R, with the addition in mass of grit and dust White Carrara marble. Internal steel reinforcement type B450C with improved adhesion for concrete.

DIMENSIONAL PARAMETER
Height 45 cm.
Width 165 cm.
Depth 54 cm.
Weight 710 kg.
Number of places 2

Alis seat
designer Gibillero Design
code G511

PRODUCT DESCRIPTION
Monoblock bench without back, with particular flared shape and characterized by incision along the front profile and right side; the engraving is characterized by a RAL 3002 “Rosso Carminio” finish.Made with a mixture, with a semi-fluid consistency of class S3, of white cement of the type 52.5R high strength, with the addition in mass of grit and powder of White Carrara marble. Internal steel reinforcement type B450C with improved adhesion for concrete.Cleaning and sanding complete with seat and supports. Grouting in 52.5R white concrete for small imperfections and rounded corners. Water-repellent glossy anti-repellent treatment for outdoor use.The available finish is in Bianco Carrara marble grit

DIMENSIONAL PARAMETER
Height 45 cm.
Width 200 cm.
Depth 50 cm.
Weight 450 kg.
Number of places 4

Domino seat
code C9040

PRODUCT DESCRIPTION
Panca monoblocco della serie DOMINO, realizzata con impasto a consistenza plastica Classe S2, di cemento bianco del tipo 52,5R ad alta resistenza, ed inerti a granulometria controllata non superiore a 10 mm. Armatura in acciaio ad aderenza migliorata per il calcestruzzo.

DIMENSIONAL PARAMETER
Height 45 cm.
Width 200 cm.
Depth 60 cm.
Weight 1000 kg.
Number of places 4

Copan bench with backrest
code C9034

PRODUCT DESCRIPTION
Modular monoblock bench, with a linear and essential shape. Seat with a thickness of 12 cm. and side supports 19 cm thick. Backrest anchored by concealed hardware. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm. Type B450C steel reinforcement with improved adhesion for concrete.

Available in different sizes.
• cod. C9034 length cm.200, depth cm.50, height cm.90, weight Kg.600;
• cod. C9035 length cm.220, depth cm.60, height cm.90, weight Kg.800;

DIMENSIONAL PARAMETER
Height 90 cm.
Width 200 cm.
Depth 50 cm.
Weight 600 kg.
Number of places 4

Alis large trash bin
designer Gibillero Design
code G510

PRODUCT DESCRIPTION
Single piece block characterized by an incision along the upper and front profile, the incision is distinguished by a RAL 3002 “Rosso Carminio” finish.Drum made with a mixture of semi-fluid consistency of class S3, of white cement of the high resistance type 52.5R, with the addition in mass of grit and powder of White Carrara marble.

DIMENSIONAL PARAMETER
Height 85 cm.
Width 54 cm.
Depth 54 cm.
Weight 300 kg.
Liters 140 lt.

Large Trash Giove grey finish
code 264-bis

PRODUCT DESCRIPTION
High-strength white 52.5R cement container with white finish and gray effect. Shaped lid, of the openable type, made of 20/10 thick galvanized sheet with external anti-cut edging; the lid is fixed to the container through supports in galvanized sheet 80/10 thick. A hinge connects the cover to one of the supports and allows the opening for the extraction of the internal bag (not supplied). The particular shape of the lid also favors the rapid flow of rainwater. Internal bag-stop ring in galvanized full round.

DIMENSIONAL PARAMETER
Height 95 cm.
Width 50 cm.
Depth 50 cm.
Liters 80 lt.

Large Trash Bin Luna grey finish
code 265-bis

PRODUCT DESCRIPTION
High-strength white 52.5R cement container with white finish and gray effect. The basket is characterized by central tapering, with decorative band in galvanized steel sheet. Shaped lid, of the openable type, made of 20/10 thick galvanized sheet with external anti-cut edging; the lid is fixed to the container through supports in galvanized sheet 80/10 thick. A hinge connects the cover to one of the supports and allows the opening for the extraction of the internal bag (not supplied). The particular shape of the lid also favors the rapid flow of rainwater. Internal bag-stop ring in galvanized full round.

DIMENSIONAL PARAMETER
Height 95 cm.
Width 50 cm.
Depth 50 cm.
Liters 80 lt.

Alis Flower box
designer Gibillero Design
code G512

PRODUCT DESCRIPTION
Single-block planter characterized by incision along the upper and front profile, the incision is distinguished by a RAL 3002 “Rosso Carminio” finish.Drum made with a mixture of semi-fluid consistency of class S3, of white cement of the high resistance type 52.5R, with the addition in mass of grit and powder of White Carrara marble.

DIMENSIONAL PARAMETER
Height 50 cm.
Width 54 cm.
Depth 54 cm.
Weight 200 kg.

Ciotolone flower box
code C9030

PRODUCT DESCRIPTION
Planter with a circular shape, with a particular flared shape. Made with dough, semi-fluid consistency of class S3, white cement of high resistance type 52,5R, with the addition in mass of grit and dust White Carrara marble.

DIMENSIONAL PARAMETER
Height 52 cm.
Width 139 cm.
Depth 139 cm.
Weight 400 kg.

Coss flower box
code C9052

PRODUCT DESCRIPTION
Planter of circular shape. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

DIMENSIONAL PARAMETER
Height 47 cm.
Width 109 cm.
Depth 109 cm.
Weight 400 kg.

Venus flower box
code C9014

PRODUCT DESCRIPTION
Planter with a circular shape, with rounded edges and ornamental band in the central part of the Moss Green color. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

Available in different sizes.
• cod. C9014 planter diameter cm.90, height cm.60, weight Kg.300;
• cod. C9015 planter diameter cm.120, height cm.80, weight Kg.700;
• cod. C9016 planter diameter 120 cm, height cm.56, weight Kg.450;

DIMENSIONAL PARAMETER
Height 60 cm.
Width 90 cm.
Depth 90 cm.
Weight 300 kg.

Lunar flower box
code C9011

PRODUCT DESCRIPTION
Planter with a circular shape, with a particular flared shape and ornamental band in the central part in copper-colored aluminum. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm. Diameter of planter cm. 90, height cm. 65, weight kg. 350.

Available in different sizes.
• cod. C9010 with planter diameter from cm. 60, height cm.65, weight Kg.200;
• cod. C9011 with planter diameter of cm. 90, height cm.65, weight Kg.350;
• cod. C9012 with planter diameter of cm. 120, height cm.65, weight Kg.500;
• cod. C9013 with a planter diameter of cm. 160, height cm.60, weight Kg.900;

DIMENSIONAL PARAMETER
Height 65 cm.
Width 90 cm.
Depth 90 cm.
Weight 350 kg.

Esagono flower box
code C9028

PRODUCT DESCRIPTION
Hexagonal shaped planter, with a particular flared shape and ornamental band in the central part in copper-colored aluminum. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

Available in different sizes.
• cod. C9028 planter with total dimensions cm.95, height cm.65, weight Kg.300;
• cod. C9029 planter with total dimensions cm.155, height cm.65, weight Kg.600;

DIMENSIONAL PARAMETER
Height 65 cm.
Width 85 cm.
Depth 95 cm.
Weight 300 kg.

Menhir flower box
code C9024

PRODUCT DESCRIPTION
Square-shaped planter, with a particular flared shape on the sides and ornamental band in the central Canna Rifile color. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

Available in different sizes.
• cod. C9023 planter from 60 x 60 cm, height cm.65, weight Kg.200;
• cod. C9024 planter from cm.90 x 90, height cm.65, weight Kg.300;
• cod. C9025 planter of cm.125 x 125, height cm.65, weight Kg.450;

DIMENSIONAL PARAMETER
Height 65 cm.
Width 90 cm.
Depth 90 cm.
Weight 300 kg.

Bagan flower box
code C9020

PRODUCT DESCRIPTION
Oval shaped planter, with a particular flared shape and ornamental band in the central part in copper-colored aluminum. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm. Planter dimensions cm. 100 x 60, height cm. 65, weight kg. 300.

Available in different sizes.
• cod. C9020 planter from cm. 100 x 60, height cm.65, weight Kg.300;
• cod. C9021 planter from cm. 130 x 60, height cm.65, weight Kg.400;
• cod. C9022 planter from cm. 170 x 60, height cm.65, weight Kg.500;

DIMENSIONAL PARAMETER
Height 65 cm.
Width 100 cm.
Depth 60 cm.
Weight 300 kg.

Giza flower box
code C9018

PRODUCT DESCRIPTION
Circular shaped planter with seat. Made with a S2-class plastic consistency, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm. Diameter of planter cm. 120, total seat diameter cm. 200, seat depth cm. 40, flower box total height cm. 65, total weight kg. 600.

Available in different sizes.
• cod. C9017 with a planter diameter of cm. 90, flower box total height cm.65, seat diameter cm.170, seat depth cm.40, weight Kg.450;
• cod. C9018 with planter diameter of cm. 120, flower box total height cm.65, seat diameter cm.200, seat depth cm.40, weight Kg.600;
• cod. C9019 with planter diameter of cm. 160, flower box total height cm.65, seat diameter cm.235, seat depth cm.40, weight Kg.900;

DIMENSIONAL PARAMETER
Height 65 cm.
Width 190 cm.
Depth 190 cm.
Weight 600 kg.

Flowerbox Mercury
code C9026

PRODUCT DESCRIPTION
Planter with a square shape and seat. Made with a S2-class plastic consistency mixture, of white high strength type 52.5R, and aggregates with a controlled granulometry of no more than 10 mm. Planter dimensions cm. 90 x 90, total sitting dimension cm. 168 x 168, seat depth cm. 40, total height cm. 65, total weight kg. 450.

Available in different sizes.
• cod. C9026 with plan dimensions of cm. 90 x 90, height cm.65, seat dimensions cm.168 x 168, seat depth cm.40, weight Kg.450;
• cod. C9027 with plan dimensions of cm. 125 x 125, height cm.65, seat dimensions cm.200 x 200, seat depth cm.40, weight Kg.650;

DIMENSIONAL PARAMETER
Height 65 cm.
Width 168 cm.
Depth 168 cm.
Weight 450 kg.

Sfera bollard
code C9045

PRODUCT DESCRIPTION
Spherical bollard. Made with a S2-class plastic consistency mixture, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

DIMENSIONAL PARAMETER
Height 50 cm.
Width 50 cm.
Depth 50 cm.
Weight 150 kg.

Machi bollard
code C9043

PRODUCT DESCRIPTION
Bollard in CLS. Made with a S2-class plastic consistency mixture, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

Available in different sizes.
• Total diameter cm. 40/52;
• Total height cm. 45/52;
• Weight kg. 100/200.

DIMENSIONAL PARAMETER
Height 52 cm.
Width 52 cm.
Depth 52 cm.
Weight 200 kg.

Dolmen bollard
code C9046

PRODUCT DESCRIPTION
Vertical bollard in CLS with central band in copper-colored aluminum. Made with a S2-class plastic consistency mixture, of high-strength type 52.5R white cement, and aggregates with a controlled granulometry of no more than 10 mm.

DIMENSIONAL PARAMETER
Height 75 cm.
Width 50 cm.
Depth 50 cm.
Weight 150 kg.

Bollard Prisma
code C9047

PRODUCT DESCRIPTION
Bollard with prismatic shape. Made with a S2 Class plastic consistency, of high strength white 52.5R cement.

Available in different sizes.
• cod. C9047 width cm.50, depth cm.50, height cm.100, weight Kg.400;
• cod. C9048 width cm.45, depth cm.45, height cm.110, weight Kg.250;

DIMENSIONAL PARAMETER
Height 110 cm.
Width 50 cm.
Depth 50 cm.
Weight 400 kg.

Fountain Poli with ground tub
code C9049

DIMENSIONAL PARAMETER
Height 121 cm.
Width 38 cm.
Depth 45 cm.
Weight 150 kg.

USED MATERIALS
White concrete travertine effect
White cement of the high resistance type 52.5R white finish with red travertine effect.

Poli fountain with suspended tub
code C9050

DIMENSIONAL PARAMETER
Height 121 cm.
Width 59 cm.
Depth 59 cm.
Weight 150 kg.

USED MATERIALS
White concrete travertine effect
White cement of the high resistance type 52.5R white finish with red travertine effect.

Lily large trash bin
code 416

PRODUCT DESCRIPTION
Large container, for the urban waste collection Giglio model. Square shape with rounded corners, made of galvanized sheet, the side of each facade is characterized by stylized floral decorative carvings. Top ring made of galvanized sheet complete with shaped cover. The support is hinged to the basket and is provided with a unique lock to allow opening and extraction of the inner bag. Galvanized steel base with holes for draining rainwater and for fixing to the ground of the structure. Base with four legs that avoid the direct contact of the structure with the ground. Tray-sack brackets made of full galvanized round with special book opening / closing system for positioning and extraction of the bag (not supplied). The basic finish for the metal parts of this product is made up of two colors, namely: “white pearl-peeled” RAL 1013 color for basket and “red wine” RAL 3005 for the cover. The customer may, however, require a different finish, chosen from the RAL colors available on our website. The painting technique used for the galvanized steel structure is made of thermosetting powders with baking. For all details, please download the detailed product details sheet.

DIMENSIONAL PARAMETER
Height 108 cm.
Width 55 cm.
Depth 73 cm.
Liters 130 lt.

Lily trash bin
code 415

PRODUCT DESCRIPTION
Giglio Model Waste Disposal Basket. Structure consisting of a galvanized steel tube tube support with cap shaped at the top, a lid complete with galvanized steel sheet reinforcement bezel, basket bottom support, galvanized steel tube tube. Square square basket with four corners galvanized in sheet metal, the basket is characterized by stylized floral decorative carvings. Zippered ring made of galvanized sheet and bottom of the basket with holes for discharge of the meteoric waters. The basket is emptied by means of the Allen screw and Front Tilt. The basic finish for the metal parts of this product is made up of two colors, specifically: “red wine” RAL 3005 for the support stand and lid and color “white pearl-skinned” RAL 1013 for basket. The customer may, however, require a different finish, chosen from the RAL colors available on our website. The painting technique used for the galvanized steel structure is made of thermosetting powders with baking. For all details, please download the detailed product details sheet.

DIMENSIONAL PARAMETER
Height 123 cm.
Width 26 cm.
Depth 40 cm.

Lily flower box
code 418

PRODUCT DESCRIPTION
Giglio model urban furniture. Square shape consisting of a perimeter frame made of galvanized steel tube tube, the base frame is provided with four legs which avoid direct contact of the structure with the ground. Each side of the planter is characterized by a galvanized decorative silhouette patterned with stylized floral decorative carvings. Internal box made of fiberglass “light gray” color. The basic finish for the metal parts of this product is “red wine” RAL 3005. The customer may still require a different finish, chosen from RAL colors available on our website. The painting technique used for the galvanized steel structure is made of thermosetting powders with baking. For all details, please download the detailed product details sheet.

DIMENSIONAL PARAMETER
Height 55 cm.
Width 70 cm.
Depth 70 cm.

Lily information stand
code 420

PRODUCT DESCRIPTION
Information stand Lily model. Structure made of galvanized sheet metal support characterized by stylized floral decorative engravings made with laser cutting technology. Rectangular frame made of galvanized steel angular profile, which allows the panel to be clamped in transparent compact polycarbonate. The lectern is equipped with holes at the base for anchoring to the ground. The basic product finishing is made up of two colors, specifically, “red wine” RAL 3005 for the support, and “white pearl pearl” color RAL 1013 for the frame of the reading table. The customer may, however, require a different finish, chosen from the RAL colors available on our website. The painting technique used for the galvanized steel structure is made of thermosetting powders with baking. For all details, please download the detailed product details sheet

DIMENSIONAL PARAMETER
Height 122 cm.
Width 36 cm.
Depth 26 cm.

Lily bike rack
code 419

PRODUCT DESCRIPTION
Vertical rack for urban furniture model Giglio. The structure consists of a shaped support made of galvanized flat iron, one of the side facades is characterized by stylized floral decorative carvings. The support allows the bike to be secured by inserting the wheel inside, or approaching the side. The structure provides anchoring to the ground by using screws and dowels to be applied to the base. The basic finish for the metal parts of this product is “red wine” RAL 3005. The customer may still require a different finish, chosen from RAL colors available on our website. The painting technique used for the galvanized steel structure is made of thermosetting powders with baking. For all details, please download the detailed product details sheet.

DIMENSIONAL PARAMETER
Height 85 cm.
Width 15 cm.
Depth 15 cm.
Number of places 1

Komete Solar shelter
designer DimcarDesignDepartment
code D818-S

PRODUCT DESCRIPTION
KOMETE SOLAR SHELTER.

Built in compliance with the current Regulations EN 1090-1: 2009 + A1: 2011 adoped to starting from 1 July 2014 as a metal carpentry element for structural use. Here there is the clarification note issued by the Superior Council of Public Works.

Structure composed of vertical uprights and upper crossbars in tubular square section of square section, side shaped panels with stylized carvings and base plates equipped with soil fixing holes. Side walls consisting of transparent layered glass silhouettes supported by special stainless steel terminals. Background wall made of galvanized steel profiles, divided into three modules each composed of transparent layered glass silhouette ensured by special stainless steel terminals. Central panel in galvanized sheet metal characterized by stylized carvings made from laser cutting. Sitting that develops for the entire width of the shelter made with shaped okumè wooded wooded planks, and equipped with shaped intermediate supports, made of galvanized steel profiles. Cover consisting of frame in rectangular profiles of galvanized steel and upper polycarbonate buffer, smoked color, unbreakable type, protected UV and particularly suitable for use in outdoor environments. In the front of the roof, half-folded, a band is made intended to host a PVC sticker, the latter can be requested as an option and is printed on high resistance material. The rear part has shaping that constitutes eaves for the drainage of meteoric waters. Thus as for the rear wall also the roof in the central part of a panel characterized by stylized carvings derived from laser cutting that create a suggestive effect with the passage of the rays of the sun from the polycarbonate cover.

distinctive features compared to the standard model

The shelter kometete solar adopt a photovoltaic panel on the top of the roof to generate Electricity that is stored in an accumulator placed inside the sitting. The seat acts as a metal container, inspectable, and hosts all the electronics necessary to make this shelter a stand-alone product. The energy stored in the accumulator is reused throughout the day in order to power a device of Qi wireless charging together with a USB and, during the hours ranging from sunset to dawn, to illuminate the LED panel located in the center of the shelter.

The basic finish for the metal parts of this product is composed of two colors, specifically: “pure white opaque RAL 9010” color and “blue matt light RAL 5012” color for the rear and rear central panel. The customer can still request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is thermosetting powder with oven baking. For all the details we invite you to download the detailed technical sheet on the product.

DIMENSIONAL PARAMETER
Height 250 cm.
Width 311 cm.
Depth 172 cm.
Weight 0 kg.

Komete bench
designer DimcarDesignDepartment
code D819-bis

DIMENSIONAL PARAMETER
Height 88 cm.
Width 146 cm.
Depth 65 cm.
Number of places 2

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Phure White RAL 9010
Powder based on carbohydrate and hardened polyester resins based on TGICs selected for their external resistance properties. Formulated with pigments and additives specifically selected for high UV and atmospheric agents resistance. Pure white color (RAL 9010).

Komete flower box
designer DimcarDesignDepartment
code D820

PRODUCT DESCRIPTION
Komete planters for urban furniture. Linear structure with rounded edges, made of galvanized sheet metal, the side part is characterized by stylized decorative carvings. Shaped interior and side panels inclined to create a depth effect. The support is equipped in the upper part with an opening for the introduction of the vegetative. The planter is provided with any holes for fixing to the ground. The basic finish for the metal parts of this product consists of two colors, specifically: “pure white opaque RAL 9010” color for the external body and “opaque whitish green RAL 6019” for the side and internal panels. The customer can however request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 48 cm.
Width 146 cm.
Depth 48 cm.

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Komete litter bin with lid and ashtray
designer DimcarDesignDepartment
code D822-bis

PRODUCT DESCRIPTION
Komete model urban waste collection container. Linear structure with rounded edges, made of galvanized sheet metal, the side part is characterized by stylized decorative carvings. The support is equipped in the upper part with an ashtray with micro-perforated sheet in AISI 304 stainless steel and an emptying system with direct fall into the bag. Upper ring with holes for the introduction of waste. Front door equipped with a single key lock, to allow frontal tilting opening and extraction of the inner bag. Bottom in galvanized sheet with holes for the drainage of rainwater and for fixing the structure to the ground. The basket is equipped with an internal bag holder ring. The basic finish for the metal parts of this product consists of two colors, specifically: “pure white opaque RAL 9010” for the external body and “opaque bluish lilac RAL 4005” for the door and rear panel. The customer can however request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 107 cm.
Width 35 cm.
Depth 35 cm.
Liters 35 lt.

Bike box Komete
designer DimcarDesignDepartment
code D861

PRODUCT DESCRIPTION
Box for Komet for urban furnishing bicycles. Module composed of a supporting structure made of tubular oval section in galvanized steel; Equipped with plates at the base for ground anchorage. Side silhouettes in galvanized sheet metal, characterized by stylized decorated carvings made by laser cutting. Central panel in galvanized sheet with entirely smooth surface to allow any graphic adhesive posting. Rear panel with stylized decorative carvings. Front door characterized by laser cutting stylized carvings, with assisted opening and closing system. The basic finish for the metal parts of this product consists of two colors, specifically: “Anthracite gray RAL 7016” color for supporting structure and side central panel, and “ORANGE ORANGE OPACO RAL 2000” for the side shapes. The customer can still request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is thermosetting powder with oven baking. For all the details we invite you to download the detailed technical sheet on the product.

DIMENSIONAL PARAMETER
Height 120 cm.
Width 106 cm.
Depth 220 cm.
Weight 0 kg.
Number of places 1

Komete bike rack
designer DimcarDesignDepartment
code D825

PRODUCT DESCRIPTION
Komete model bicycle rack for street furniture. Structure composed of a shaped support with rounded edges, made of galvanized sheet metal, with an external side characterized by stylized decorative carvings obtained by laser cutting. Support provided at the base with holes for fixing to the ground. Upper decorative elements made of trapezoidal boxed elements made of galvanized sheet metal. The rack is designed for use on both sides. The basic finish for the metal parts of this product consists of two colors, specifically: “pure white opaque RAL 9010” color for the support and “opaque yellow orange RAL 2000” for the upper trapezoidal decoration. The customer can however request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 35 cm.
Width 170 cm.
Depth 15 cm.
Number of places 5

Komete bike stand
designer DimcarDesignDepartment
code D824

PRODUCT DESCRIPTION
Komete model single bike rack for urban furniture. Structure composed of a vertical support with rounded edges, made of galvanized sheet metal, with a lateral part characterized by stylized decorative carvings obtained by laser cutting. Support provided at the base with holes for fixing to the ground. Upper decorative element made of a trapezoidal box made of galvanized sheet metal. The basic finish for the metal parts of this product consists of two colors, specifically: “pure white opaque RAL 9010” color for the support and “opaque yellow orange RAL 2000” for the upper trapezoidal decoration. However, the customer can request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 90 cm.
Width 15 cm.
Depth 15 cm.
Number of places 1

Eddie bench
designer Gibillero Design
code G467

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

DIMENSIONAL PARAMETER
Height 87 cm.
Width 200 cm.
Depth 58 cm.

Bench Flea with OKUME wood planks
designer Gibillero Design
code G518

PRODUCT DESCRIPTION
Bench with seat and back in OKUME ‘wood strips, Flea model. Structure consisting of lateral supports in shaped and bent galvanized sheet steel, with notches made from high definition plasma cutting. Seat made with shell in galvanized steel sheet covered with Okumè type wood profiles. Upper backrest also covered with Okumè wood planks fixed on a galvanized steel sheet shell. The bench is equipped with holes for fixing to the ground. The bench is supplied in an assembly kit with stainless steel screws and assembly instructions. The basic finish for this product is “traffic white RAL 9016”, while the wooden planks are treated with “light mahogany” color finish. The customer can however request a different finish, to be chosen among the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with baking. For all the details, please download the detailed product data sheet.

DIMENSIONAL PARAMETER
Height 80 cm.
Width 190 cm.
Depth 65 cm.
Number of places DIMENSIONAL PARAMETER
Height 80 cm.
Width 190 cm.
Depth 65 cm.
Number of places

Cubik seat with wood planks
designer Gibillero Design
code G462

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Wooden planks
Nordic pine coming from northern Europe. The logs are cut and worked, at the origin, according to the strictest laws on woodland reproduction. Impregnation treatment involves the use of protection salts which are also tested and approved by the Berlin Construction Institute for DIN68800. The process of electronically controlled autoclave on the concentration of salts in the wood guarantees a long service life and total unattability by aggressive agents.
Okoumé , from the rosy roses to the dark red, grayish white (well-distinguished) white sapwood; medium texture, fibers with significant truncated differences: sometimes straight, sometimes wavy or even braided. Clown Aucoumea (Angouma, Gaboon, Okoumé) is a tree of the Burseraceae family originating in West Tropical Africa and particularly in Gabon, Spanish Guinea, Cameroon and the Congo. It is a medium sized tree that grows up to 30-40 meters, rarely larger, with a trunk diameter up to 2/5 meters; it is very abundant and it exports more gaboon / okumè than any other African wood.

DIMENSIONAL PARAMETER
Height 46 cm.
Width 45 cm.
Depth 45 cm.
Number of places 1

Cubik flower box hight
designer Gibillero Design
code G489

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

DIMENSIONAL PARAMETER
Height 92 cm.
Width 45 cm.
Depth 45 cm

Kurt large trash bin
designer Gibillero Design
code G493

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Kurt large trash bin with 3 compartments
designer Gibillero Design
code G492

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Large trash bin Benjamin
designer Gibillero Design
code G456

PRODUCT DESCRIPTION
From the particular rectangular shape, characterized by two curved angles; made up of shaped external panels (front / back) made of galvanized sheet, internal structure made of galvanized steel sections divided into 3 compartments. Top covers openable, made of galvanized sheet, made with high definition plasma cutting technology, and equipped with hole for the introduction of waste. Each lid is fitted inside a folding support ring which can also be folded.The basket is characterized by tapering at the base, consisting of a perimetrical band in galvanized steel. The base is equipped with holes for the drainage of rainwater. Each compartment is marked with stickers (front / back paneling, and on the lid) indicating the type of collection.The basic finish for this product consists of four colors, specifically “bright aluminum” for the frame and panels, “RAL 1018” yellow-zinc color for the lid and the collection stem Plastic, “sky blue” color RAL 5015 for the cover of the paper collection and color “traffic red” RAL 3020 for the lid and drum of the waste collection. The customer can still request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is made of thermosetting powders with baking. For all the details we invite you to download the detailed technical data sheet on the product.

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

DIMENSIONAL PARAMETER
Height 81 cm.
Width 99 cm.
Depth 48 cm.
Liters 135 lt.

Diapason litter bin tris model
designer Gibillero Design
code G508

Miss Thin litter bin with lid
designer Gibillero Design
code G469-bis

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

DIMENSIONAL PARAMETER
Height 115 cm.
Width 62 cm.
Depth 32 cm.
Liters 60 lt.

Flower box Flora big with seat
designer Gibillero Design
code G466

DIMENSIONAL PARAMETER
Height 45 cm.
Width 250 cm.
Depth 250 cm.

Flower box Flora tall
designer Gibillero Design
code G465

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

DIMENSIONAL PARAMETER
Height 70 cm.
Width 100 cm.
Depth 100 cm.

Scirocco grid three saver
designer Gibillero Design
code G526

Star grid three saver
designer Gibillero Design
code G527

Turbo shelter
designer Gibillero Design
code G528

PopUp shelter
designer Gibillero Design
code G543

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Laminated glass
Layered safety glass as a result of the assembly of two slabs by means of a PVB (polyvinyl butyral) interlayer. The intermediate layer keeps the two glass plates in place even when the latter breaks, and with its resistance prevents the formation of large sharp fragments while remaining compact even if fractured. The PVB layer also gives the material a more acoustic effect and increases UV protection.

DIMENSIONAL PARAMETER
Height 255 cm.
Width 353 cm.
Depth 196 cm.

PopUp totem
designer Gibillero Design
code G536

Bel bike rack
designer Gibillero Design
code G491

PRODUCT DESCRIPTION
With a particular shape, the bike-rack is composed of shaped supports for hooking the bicycle, made of flat iron; each equipped with a plug-in system for insertion in sequence. Each support is interspersed with crosspieces made of galvanized steel round tube. The entire structure is made integral through an internal rod made of galvanized circular section steel, and end caps in galvanized sheet metal. The basic finish for this product is signal yellow for the supports and anthracite gray for the crosspieces, the customer can still request a different finish, to be chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is thermosetting powders with oven cooking. For all the details, please download the detailed product data sheet.

DIMENSIONAL PARAMETER
Height 72 cm.
Width 154 cm.
Depth 66 cm.

Tatou bike stand
designer Gibillero Design
code G494

Tresette bike rack model A
designer Gibillero Design
code G496-bis

Traffic white RAL 9016
Powder based on carbohydrate and hardened polyester resins based on TGICs selected for their external resistance properties. Formulated with pigments and additives specifically selected for high UV resistance and surface-to-white color traffic (RAL 9016).

Rainbow bike rack
designer Gibillero Design
code G495

Bean bike stand
designer Gibillero Design
code G513

DIMENSIONAL PARAMETER
Height 53 cm.
Width 100 cm.

Holyday picnic table
code G498

PRODUCT DESCRIPTION
The Holiday picnic table consists of two shaped supports made of galvanized steel tube with a circular section, each support constitutes the supporting foot of both the table top and the seat surface. The supports are equipped at the base with holes for fixing to the ground. Table top and seat top made up of frames in galvanized steel profiles and Okumè wood profiles. The basic finish for the metal parts of this product is RAL 7001 silver gray. The customer can still request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 82 cm.
Width 190 cm.
Depth 190 cm.
Number of places 6

WOW seat with flower box
designer Gibillero Design
code G558

PRODUCT DESCRIPTION
The seat with Wow planter is made up of a single shaped block, characterized by lateral shapes in galvanized steel sheet obtained by laser cutting technology, depicting the wording “WOW”. The two shapes are made integral with each other by press-folded casings in galvanized steel sheet. In the center of the module, on the upper part of the letter “O” there is a container for inserting plants. The seat is equipped at the base with raised supports to avoid direct contact with the floor, and to facilitate the flow of rainwater. The basic finish for the metal parts of this product consists of two colors, specifically: opaque traffic red RAL 3020. The customer can still request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 48 cm.
Width 138 cm.
Depth 45 cm.
Number of places 2

Matita seat
designer Gibillero Design
code G557

PRODUCT DESCRIPTION
Color and creativity come together to create a one-of-a-kind seat, the Matita bench was born as a new form of furniture designed for use by children. Playful lines and bright colors, all suitable for children. The Matita bench is made up of a hexagonal shaped frame, made of galvanized steel sheet and internal frame in galvanized steel profiles. “Point” of the pencil consisting of a truncated cone made of galvanized steel sheet, obtained by laser cutting and subsequently shaped. Terminal element in galvanized sheet designed to reproduce the “mine” of the pencil. The pencil bench is equipped with a frame at the base for possible fixing to the ground. The basic finish for the metal parts of this product consists of two colors, specifically: “Opaque light blue” RAL 5012 color and “Light ivory” RAL 1015 color. The structure is raised from the ground by means of galvanized steel profiles, in order to avoid contact with the entire bottom surface and allow the runoff of rainwater. The customer can however request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 40 cm.
Width 46 cm.
Depth 200 cm.
Number of places 3

Formaggino litter bin
designer Gibillero Design
code G560

PRODUCT DESCRIPTION
The Formaggino basket was born as a new form of furniture designed for use by children, with playful and unique lines, designed for children. The bin is made up of a shaped drum made of galvanized steel sheet and internal frame in galvanized steel round tube. The base is equipped with holes for fixing to the ground; in addition, the structure is raised from the ground through supports in galvanized steel profiles, in order to avoid contact with the entire bottom surface and allow the runoff of rainwater. The external body is characterized by stylized carvings, obtained by laser cutting technology, which reproduce the “typical” holes of the cheese. In addition to aesthetics, the holes have been designed for the introduction of waste. Litter bin with flap door, complete with internal container (fixed type) and key lock. The basic finish for the metal parts of this product is in the color “matt zinc yellow” RAL 1018. The structure is raised from the ground by means of galvanized steel section supports, in order to avoid contact with the entire bottom surface and allow the runoff of rainwater. The customer can however request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is with thermosetting powders with oven cooking. For all the details, please download the detailed technical data sheet on the product.

DIMENSIONAL PARAMETER
Height 86 cm.
Width 68 cm.
Depth 50 cm.
Liters 25 lt.

Tubetto seat with flower box
designer Gibillero Design
code G556

DIMENSIONAL PARAMETER
Height 90 cm.
Width 87 cm.
Depth 60 cm.
Number of places 2

Loop multi-activity table
designer DimcarDesignDepartment
code D832

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Bruchetto composition with baskets, three seats and bike racks
designer Gibillero Design
code G553

PRODUCT DESCRIPTION
Bruchetto composition with 1 basket, 3 seats and 1 bike rack, item code G553 Also available in individual parts: – Trash bin item code G553 / C; – Seat item code G553 / S; – Bike carrier article code G553 / P.

Galvanized steel
In its production, zinc-plated steel undergoes the galvanizing process, therefore, it results that the metal structure of the article is already galvanized at the start. Galvanizing is one of the most popular methods for protecting steel products from external weathering. The guarantee that the metal does not rust is given by the cathodic protection offered by the zinc layer, which in the presence of a pinch or a superficially unprotected area, having less potential, is oxidized to the place of the steel.

Teulada bench inclusion
code 1137-i

PRODUCT DESCRIPTION
Bench for urban furnishing Teulada model inclusion. Structure composed of two stylized shape supports consisting of a double galvanized steel silhouette derived from technology to the plasma cut adored by decorative carvings. Each support is provided with a plate to the base useful for fixing to the ground. Seat-back shell made with round galvanized steel tube profiles. The session consists of central part used for use by disabled persons with only backrest, and two parts on the sides equipped with seat and backrest. All profiles are welded on special silhouettes that give the session an anatomical shape. The Teulada bench is supplied in an assembly kit with steel screws and mounting instructions. The basic finish for this product consists of two colors, specifically: “brilliant aluminum” color for internal shapes and shell, color “Ruby Rail RAL 3003” for external shapes. The customer can still request a different finish, of choice Among the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is thermosetting powder with oven baking. For all details we invite you to download the detailed technical sheet on the product.

DIMENSIONAL PARAMETER
Height 80 cm.
Width 200 cm.
Depth 60 cm.
Number of places 3

Shelter for cars Arles
designer DimcarDesignDepartment
code D863

PRODUCT DESCRIPTION
Galvanized steel cover used for vehicle parking, model Arles. Supporting structure consisting of vertical upright in tubular square-section galvanized steel, spaced by cross-sectional steel tube with a rectangular section. Each carrier structure is provided at the base of galvanized sheet metal plate made with laser cutting, with fixing holes with cement foundation. Cover frame consisting of supporting crosspieces in galvanized steel tube with rectangular and rectangered rains in galvanized tubular; The cover is equipped at the end of a special shading towel. The fixing of the structure takes place by means of plinets or cement base. The cover is supplied in assembly kit with steel screws and mounting instructions. The basic finish proposed for this product is “brilliant aluminum” color. The customer can still request a different finish, chosen from the RAL colors available on our website. The painting technique adopted for the galvanized steel structure is thermosetting powder with oven baking. For all the details we invite you to download the detailed technical sheet on the product.

Extensiono module:
• Cod. D863-M Extension module for Arles car cover

DIMENSIONAL PARAMETER
Height 260 cm.
Width 275 cm.
Depth 500 cm.
Number of places 1