Skip to main content

SAGUSTU HORSE MATS AND WALL COVERINGS

SAGUSTU

Since 1992 is SAGUSTU your expert partner for equestrian flooring. Our range contains a variety of product solutions for every floor area. From stable mats for stalls and open barns, rubber mats for trailers and rubber screed to surface stabilisation solutions for riding arenas. We have over 25 years’ experience, making us experts in all aspects of equestrian rubber mats.

Stable mats from SAGUSTU: economical and easy to fit

Our range includes a variety of water-permeable and waterproof floor coverings for stables and open barns. Waterproof rubber mats for horses save up to 70 percent on bedding, while water-permeable mats save up to 90 percent. This means lower costs for you. Our rubber mats are easy to install. You have a choice of several installation systems: Edge to edge, a tongue and groove system, or an interlocking system.

Eldorado-Puzzle mat with Horse head profile

Eldorado-Puzzle mat with Horse head profile

The Eldorado interlocking mat can be joined so well that it creates an almost seamless covering. This provides the perfect flooring for your horse.

Measurements:

  • Available in two different sizes
  • Thickness: 16 mm
  • Colour: black
  • Top surface: Horse’s head profile
  • Underside: Groove profile
  • Interlocking joint system
  • Depending on the area there is hardly any wastage thanks to the addition of half Eldorado interlocking mats (0.50 m x 1.00 m)

Mat sizes available:

  • 1.00 m x 1.00 m                                      (Interlocking system on 4 sides)
  • 0.50 m x 1.00 m                                       (interlocking system on 3 sides – 1 long side without interlocking tabs)

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed.

Eldorado-air cushion mat with tongue and groove

The large, circular air cushions on the underside provide maximum thermal insulation and softness. Superb elasticity promises the most comfortable stable floor.

Measurements:

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.17 m x 0.77 m, 1 mat = 0.90 sqm
  • Thickness: 30 mm
  • Colour: black
  • Surface: Hammer groove profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed.

SAGUSTU-stable mat maxi

The large, circular air cushions on the underside provide maximum thermal insulation and softness. Superb elasticity promises the most comfortable stable floor.

Measurements:

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.17 m x 0.77 m, 1 mat = 0.90 sqm
  • Thickness: 30 mm
  • Colour: black
  • Surface: Hammer groove profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed.

Information on cutting can be found here.

As rubber expands when heated, leaving too little wall clearance can cause it to pucker.

SAGUSTU-Duplex Stable mat

The edge to edge system makes the Duplex stable mats quick and easy to install. The hammered surface profile is easy to clean and provides good grip. The grooves on the underside mean that our Duplex stable mats are very flexible too.

Measurements:

  • Available in a choice of sizes
  • Thickness: 18 mm
  • Colour: black
  • Surface: coarse, hammered profile
  • Underside: broad, grooved profile
  • No special joining system, installation: edge to edge

Mat sizes available:

  • 1.00 m x 1.50 m
  • 1.00 m x 1.65 m
  • 1.25 m x 1.65 m
  • 1.20 m x 1.75 m
  • 1.20 m x 2.20 m
  • 1.20 m x 2.50 m

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed.

SAGUSTU-rhomb stable mat

The edge to edge system makes the Duplex stable mats quick and easy to install. The hammered surface profile is easy to clean and provides good grip. The grooves on the underside mean that our Duplex stable mats are very flexible too.

Measurements:

  • Available in a choice of sizes
  • Thickness: 18 mm
  • Colour: black
  • Surface: coarse, hammered profile
  • Underside: broad, grooved profile
  • No special joining system, installation: edge to edge

Mat sizes available:

  • 1.00 m x 1.50 m
  • 1.00 m x 1.65 m
  • 1.25 m x 1.65 m
  • 1.20 m x 1.75 m
  • 1.20 m x 2.20 m
  • 1.20 m x 2.50 m

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed

The Diamond stable mats have a small diamond pattern surface profile. This gives them excellent non-slip properties, essential for getting up safely. The edge to edge system means that they’re quick to install too.

Measurements:

  • Available in a choice of sizes
  • Thickness: 17 mm
  • Colour: black
  • Top surface: small diamond pattern
  • Underside: smooth
  • No special joining system, installation: edge to edge

Mat sizes available:

  • 1.00 m x 1.50 m
  • 1.00 m x 2.00 m
  • 1.22 m x 1.83 m

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed.

SAGUSTU-solid stable flooring (without tongue and groove

Offers many benefits on non-concrete ground. Small slabs means less wastage! Easy to sweep. Circular air cushions on the underside provide excellent thermal insulation. Pimpled surface gives better grip than concrete. Tongue and groove system creates a solid join. Can be installed with cross or T joints.

Measurements:

  • Size: 1.20 m x 0.80 m
  • Covered area: 1.16 m x 0.76 m, 1 mat = 0.89 sqm
  • Thickness: 24 mm
  • Colour: Anthracite
  • Surface: Pimpled profile
  • Underside: Circular air cushions
  • Tongue and groove system on four sides

SAGUSTU-liquid rubber flooring

Rubber Screed can be laid without joins, creating a long-lasting, seamless and waterproof rubber floor covering. Impervious to PH neutral cleaning agents. A thickness of 20 mm is recommended for use in stables. Installation on wood, concrete, interlocking paving, metal and other surfaces possible. The surface can be made smooth and closed cell with the aid of a spiked roller.

On-site professional installation by our experienced team possible on request.

Content:

  • 3 components (rubber granulate, natural rubber, binding agent)
  • Black colour (other colours – red-brown or dark green – available at additional cost)
  • Weight approx. 50 kg / pack
  • Yield per coating thickness
  • from 15 mm: 3 sqm / pack
  • Yield per coating thickness
  • from 20 mm: 2.25 sqm / pack

Repair packs with the following yields when laid at a thickness of 10 mm are also available:

  • 2 sqm / pack
  • 1 sqm / pack
  • 0.5 sqm / pack (“mini repair kit”)

SAGUSTU-universal stable mat

The Universal stable mats are characterised by the pimpled surface profile which is non-slip and easy to clean.

Measurements:

  • Size: 1.22 m x 1.83 m
  • Thickness: 17 mm
  • Colour: black
  • Top surface: Pimpled profile
  • Underside: Groove profile
  • No special joining system, installation: edge to edge

Bedding recommendations:

We recommend the use of high-absorbency bedding (wood shavings or similar). The bedding will also help to seal the joints. Any remaining liquid that seeps between the mats will evaporate.

Subsurface:

The subsurface must be level and sealed, concrete or paving. No incline needed.

SAGUSTU-impact protection system rubber plus

Flexible impact resistant wall mat

Measurements:

  • Carrier plate waterproof 12mm
  • Cellular rubber inlay 10mm
  • SAGUSTU 8 mm Solid rubber mats
  • Height: 1.25 m or 1.50 m
  • Any length up to 4.00 m

Top edge protected with an aluminium U channel.